Yamaha Wolverine Scratch Resistant Flip Up Windshield by SuperATV

399.95
Ask a question
$399.95

Availability: In Stock

This windshield is easy to install and is constructed of 1/4" AR abrasion resistant polycarbonate which features a proprietary hard coat technology that offers protection against chemical and UV attack. All hardware included.
Qty:
Add to Wishlist
Verify your product fitment.

SKU: FWS-Y-WV-70
Brand: SuperATV

Yamaha Wolverine Scratch Resistant Flip Up Windshield

SuperATV’s new flip up windshield is one of the best windshields on the market. They started with the strongest, thickest, most scratch resistant material. The industry leading 1/4” thick AR is much stronger than your average UTV windshield. The material is hard coated on both sides to provide scratch resistance for years of use. Manufactured in SuperATV's facility in Madison, Indiana.

Help protect you and your passenger from sticks and other flying debris while blazing the trail with a SuperATV windshield. Each windshield is a super tough polycarbonate construction with a bottom seal that’s contoured to your ride’s design.

All SuperATV windshields come complete with all hardware and instructions needed to make installation a breeze.

Yamaha Wolverine Scratch Resistant Flip Up Windshield Features:

  • Strong, durable polycarbonate scratch resistant construction.
  • Constructed of AR abrasion resistant polycarbonate which features a proprietary hard coat technology that offers protection against chemical and UV attack.
  • Easy to install.
  • 3 position windshield allows you to choose your comfort level and protection levels. Go from fully closed, partially open for partial airflow, or fully open for full airflow.
  • Windshield has gas spring supports to help hold the windshield in position when fully opened. Latch mechanism helps hold it securely in place in the closed or partially opened position.
  • Can be used with Soft Top or Hard Top.
  • Contoured to the hood with full-length rubber seal for a great fit and seal.
Warning: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

2017 Fitments

  • 2017 Wolverine

2016 Fitments

  • 2016 Wolverine

Yamaha_Wolverine_FlipWindshield_FWS-Y-WV_1

- When assembling, do not tighten hardware completely.
- SuperATV has found that installing components to windshields on a
workbench, as shown in illustrations, makes for easiest installation.

Yamaha_Wolverine_FlipWindshield_FWS-Y-WV_2

Yamaha_Wolverine_FlipWindshield_FWS-Y-WV_3

- Install Hood Seal to bottom edge of Lower Windshield (B).

Yamaha_Wolverine_FlipWindshield_FWS-Y-WV_4

Lower Windshield (B)

- Install (2) Clamps (F) to Lower Windshield (B) with M6-1.0 x 20mm Lg. BHCS and M6 Washers.
- Install Right/Left Supports (G)(H) to Lower Windshield (B) with M6-1.0 x 20mm Lg. BHCS, M6 Washers,
and M6-1.0 Nylock Nuts.
- Secure Right/Left Supports (G)(H) to Clamps (F) with M8-1.25 x 15mm Lg. BHCS.Yamaha_Wolverine_FlipWindshield_FWS-Y-WV_5

- Install Catch, part of Latch Assembly (D), to Lower Windshield (B); place Latch Support (J) on bottom
section of Lower Windshield (B) and secure with M6-1.0 x 20mm Lg. BHCS and M6-1.0 Nylock Nuts.

Yamaha_Wolverine_FlipWindshield_FWS-Y-WV_6

- Install Lower Windshield (B) to Roll Cage with bolts included with Clamps (F).
- Install provided Gasket to Lower Windshield (B).

Yamaha_Wolverine_FlipWindshield_FWS-Y-WV_7

 

Upper Windshield (A)

- Install Handle and Support, part of Latch Assembly (D), to Upper Windshield (A) with
M6-1.0 x 20mm Lg. BHCS and M6-1.0 Nylock Nuts.

Yamaha_Wolverine_FlipWindshield_FWS-Y-WV_8

- Install Pivot Block (E) to Upper Windshield (A) with M6-1.0 x 20mm Lg. BHCS, M6 Washers,
and M6-1.0 Jam Nuts.
- Install Clamp (F) and Support (K) to Pivot Block (E) with M8 Shoulder Bolt.
- Repeat for opposite side.

Yamaha_Wolverine_FlipWindshield_FWS-Y-WV_9

- Install Clamp (F) and Gas Strut (C) to Support (K).
- Secure Gas Strut (C) to Pivot Block (E) with M8 Nylock Nut.
- Repeat for opposite side.

Yamaha_Wolverine_FlipWindshield_FWS-Y-WV_10

- Install Upper Windshield (A) to Roll Cage with bolts included with Clamps (F).

Yamaha_Wolverine_FlipWindshield_FWS-Y-WV_11

 

- Engage Latch and align Windshield assembly to machine making sure that Seal,
on Lower Windshield (B), is in contact with Hood.
- Tighten hardware completely.

Yamaha_Wolverine_FlipWindshield_FWS-Y-WV_12

 

Windshield Cleaning:
- Do not use a dry cloth, or your hands, to wipe off Windshield; Scratching will occur.
- Do not use window cleaning fluids (Windex, 409, etc) or any solvents (gasoline, denatured alcohol, acetone, etc).
- Never use abrasive cleaners, abrasive pads, or gritty cloths.
1. Thouroughly rinse Windshield to float off dirt and mud.
2. Using a soft cloth, or microfiber cloth, clean Windshield with warm water and a gentle detergent. Baby shampoo or hand
washing soap are recommended.
3. To prevent water spots, use a chamois and blot Windshield dry.

 

 

Only registered users can write reviews. Please, log in or register

* Required Fields