Yamaha Viking Windshield - Flip Windshield by SuperATV

449.95
Ask a question
$449.95

Availability: In Stock

The Yamaha Viking Windshield - Flip Windshield features a very strong polycarbonate construction for unsurpassed durability! This windshield is hard-coated on each side to protect your investment from harmful chemicals and UV exposure. Increase airflow and cab comfort for yourself and your passengers with this multi-position, flip windshield for the Yamaha Viking UTV today!
Qty:
Add to Wishlist
Verify your product fitment.

SKU: FWS-Y-VIK-70
Brand: SuperATV

Yamaha Viking Windshield - Flip Windshield by Super ATV

This Yamaha Viking Windshield - Flip Windshield is made from a sturdy polycarbonate ensuring the long-life durability you've come to trust from SuperATV products! It has a rubber seal follows the contours of your vehicle's hood. It is easy to install and flips to three (3) different positions to help create the right blend of airflow, visibility, and protection!

Protect your passengers from rocks and debris, provide air flow for comfort, and enjoy maximum visibility with this flip windshield for the Yamaha Viking. Made from 1/4-inch Makrolon AR polycarbonate, this windshield is nearly unbreakable! All of the hardware and instructions are included for simple installation. 

Yamaha Viking Windshield - Flip Windshield Features:

  • 1/4” Makrolon® AR abrasion resistant polycarbonate available with and without tint
  • Makrolon windshields are hard coated on both sides for extreme durability
  • Protects against chemical and UV attack
  • Contoured to hood with full-length rubber seal for a great fit
  • Easy to install – comes with all necessary hardware and instructions
  • Can be used with aftermarket soft or hard tops
  • Will NOT work with OEM Soft Top.
Warning: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

2018 Fitments

  • 2018 Viking

2017 Fitments

  • 2017 Viking

2016 Fitments

  • 2016 Viking

2015 Fitments

  • 2015 Viking 700

2014 Fitments

  • 2014 Viking 700

Yamaha Viking_FlipWindshield_FWS-Y-VIK_1Yamaha Viking_FlipWindshield_FWS-Y-VIK_2Yamaha Viking_FlipWindshield_FWS-Y-VIK_3

Windshield Cleaning:
- Do not use a dry cloth, or your hands, to wipe off Windshield; Scratching will occur.
- Do not use window cleaning fluids (Windex, 409, etc) or any solvents (gasoline,
denatured alcohol, acetone, etc).
- Never use abrasive cleaners, abrasive pads, or gritty cloths.
1. Thouroughly rinse Windshield to float off dirt and mud.
2. Using a soft cloth, or microfiber cloth, clean Windshield with warm water and a
gentle detergent. Baby shampoo or hand washing soap are recommended.
3. To prevent water spots, use a chamois and blot Windshield dry.

Yamaha Viking_FlipWindshield_FWS-Y-VIK_4

When assembling and installing, do not tighten hardware completely unless noted.

Lower Windshield (B)

- Install Clamp (F) to Lower Windshield (B) with hardware shown.
- Install provided Hood Seal and Gasket to Lower Windshield (B).
- Repeat for opposite side.

Yamaha Viking_FlipWindshield_FWS-Y-VIK_5

- Install Right/Left Supports (G)(H) to Lower Windshield (B) with hardware shown.

- Secure Right/Left Supports (G)(H) to Clamps (F) with hardware shown.

- Install Catch, part of Latch Assembly (D), to Lower Windshield (B); place Latch Support (J) on bottom

section of Lower Windshield (B) and secure with hardware shown.

Yamaha Viking_FlipWindshield_FWS-Y-VIK_6

- Install Lower Windshield (B) to Roll Cage with bolts included with Clamps (F).

Yamaha Viking_FlipWindshield_FWS-Y-VIK_7Upper Windshield (A)

Upper Windshield (A)

- Install Handle and Support, part of Latch Assembly (D), to Upper Windshield (A)

 

with hardware shown.

Yamaha Viking_FlipWindshield_FWS-Y-VIK_8

 

- Install Pivot Blocks (E) to Upper Windshield (A) with hardware shown.

- Install Clamp (F) and Support (K) to Pivot Block (E) with hardware shown.

- Repeat for opposite side.

 

Yamaha Viking_FlipWindshield_FWS-Y-VIK_9

- Install Clamp (F) and Gas Strut (C) to Support (K).

- Secure Gas Strut (C) to Pivot Block (E) with M8 Nylock Nut.

- Repeat for opposite side.

Yamaha Viking_FlipWindshield_FWS-Y-VIK_10

- Install Upper Windshield (A) to Roll Cage with bolts included with Clamps (F).

Yamaha Viking_FlipWindshield_FWS-Y-VIK_11

- Engage Latch and align Windshield assembly to machine making sure that Seal, on Lower

Windshield (B), is in contact with Hood.

- Tighten hardware completely.

Yamaha Viking_FlipWindshield_FWS-Y-VIK_12

 

 

 

 

 

 

 

 

- Install Pivot Blocks (E) to Upper Windshield (A) with hardware shown.- Install Clamp (F) and Support (K) to Pivot Block (E) with hardware shown.

Only registered users can write reviews. Please, log in or register

* Required Fields