Brand: Kolpin Powersports
Please read and understand these instructions completely before installation to avoid injury to yourself, damage to the vehicle or accessory.
Be certain to follow all specifications. For proper installation, two people are required
Dealer: These instructions contain important information for future reference and must be given to the customer at time of purchase or
upon completion of installation. Torque specifications must be followed when tightening bolts.
Note that a few components of the vehicle are not depicted on the drawings in order to make the installation
instructions as clear as possible.
a) To apply the edge guard (Item B) to the windshield (Item A), find a clean flat area where you can lay down the windshield. Partially remove the protective film on both sides and apply the edge guard using manual pressure to ensure good adhesion to the windshield.
b) Attach clamps (Item C) using supplied hardware (Item D) to the roll cage of your vehicle as per drawings. Do not tighten the clamps to the roll cage at this stage; you will need to make adjustments later on.
c) Install the windshield to all clamps using supplied knobs (Item D) without applying final torque. Adjust the position of the windshield
and tighten all screws with specified torque indicated below.
2. Maintenance and Care
Tighten all hardware after first use and periodically thereafter.