UTV Gun Mount by Kolpin

85.04
Ask a question

Regular Price: $115.49

Special Price $85.04

Availability: In Stock

This UTV Gun Mount installs to the floor of your UTV,truck or similar vehicle or to the bed of your UTV for easy access to your firearms.
Qty:
Add to Wishlist
Verify your product fitment.

SKU: 20073
Brand: Kolpin Powersports

UTV Gun Mount by Kolpin

This UTV Gun Mount installs to the floor of your UTV,truck or similar vehicle or to the bed of your UTV for easy access to your firearms.It provides a secure and safe fit,preventing vibration and movement over rough terrain.Firearms can be placed facing either direction for access from the driver or passenger side.

UTV Gun Mount Features

  • Full 360 degree directional orientation provides easy access
  • Fully adjustable,angling up to 45 degrees in either direction
  • Heavy-duty,over-molded butt section to secure the stock of your firearm
  • Over-molded v-blocks with tough rubber straps provide firearm and barrel support
  • Safely and securely holds either shotguns or rifles
  • Can accommodate a firearm cased within a gun sock style case
  • Adjustable height from 27.5" to 35.5"
  • Does NOT fit all vehicles including Polaris RZR or Yamaha Rhino
  • Specific Adapter plates or risers may be needed. (20077 for Mid Size Ranger, 20074 Polaris Ranger Full Size)
Warning: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

2017 Fitments

  • 2017 Mule 4000/4010
  • 2017 Commander 800/1000

2016 Fitments

  • 2016 Ranger 570 (Fullsize - Rounded Bars)
  • 2016 Mule 4000/4010
  • 2016 Commander 800/1000

2015 Fitments

  • 2015 Ranger 800 (Fullsize)
  • 2015 Mule 4000/4010
  • 2015 Commander 800/1000

2014 Fitments

  • 2014 Ranger 800 (Fullsize)
  • 2014 Ranger 400/500/570/800 (Midsize)
  • 2014 Mule 4000/4010
  • 2014 Commander 800/1000

2013 Fitments

  • 2013 Ranger 800 (Fullsize)
  • 2013 Ranger 400/500/800 (Midsize)
  • 2013 Mule 4000/4010
  • 2013 Commander 800/1000

2012 Fitments

  • 2012 Ranger 800
  • 2012 Ranger 400/500
  • 2012 Mule 4000/4010
  • 2012 Commander 800/1000

2011 Fitments

  • 2011 Ranger 800
  • 2011 Ranger 400/500
  • 2011 Mule 4000/4010
  • 2011 Commander 800/1000

2010 Fitments

  • 2010 Ranger 800
  • 2010 Ranger 400/500
  • 2010 Mule 4000/4010

2009 Fitments

  • 2009 Ranger 700
  • 2009 Ranger 500
  • 2009 Mule 4000/4010

2008 Fitments

  • 2008 Ranger 700
  • 2008 Ranger 500
  • 2008 Mule 3000/3010

2007 Fitments

  • 2007 Ranger 700
  • 2007 Ranger 500
  • 2007 Mule 3000/3010

2006 Fitments

  • 2006 Ranger 700
  • 2006 Ranger 500
  • 2006 Mule 3000/3010

UTV Gun Mount_1

UTV Gun Rack Assembly:
1. Attach the Forearm Holder to the insert tube using the 2 – 3/8” x 2.25” long bolts, and 4 flat
washers and 2 – 3/8” Nylock nut.
2. Attach the Gun Butt Holder to the Main Tube using the 2 – 3/8” x 3.25” long bolts, and 4 flat
washers and 2 – 3/8” Nylock nut.
3. Bolt the Steel Base Plate to the main tube. This may be set vertically or use the slots to custom fit
it to the angle of your UTV.
4. Slide the Insert Tube into the Main Tube and Bolt at height that is appropriate for you and your
gun. Note: UTV Gun Mount is able to be used in many different settings. Find which is the best
application for your guns and your UTV.

UTV Gun Rack Mounting:
1. Attach the UTV Gun Mount to the floor of your UTV using the 4 - 3/8” x 1.00” Bolts, 4 – 3/8”
Nylock nuts and 8 washers. Drilling is required.

CAUTION: Be sure that you are not drilling into anything under your floor as it may
void any warranty of your Vehicle. You may find it useful to pull up the flooring and
drill holes where you want the UTV Gun Mount to be at.

UTV Gun Rack Use:
• Place the Gun into the Kolpin UTV Gun Mount and secure with the Rubber strap.
• The UTV Gun Mount is designed to carry your Guns safely and securely from one destination to
the next.

CAUTION: Always make sure gun is unloaded and pointed in a safe direction before
traveling.
CAUTION: Check with local authorities to make sure you are able to travel with
uncased weapon

UTV Gun Mount_2

Assemblage du porte-fusil pour VU
5. Fixez le support du garde-main au tube intérieur à l’aide des 2 boulons de 3/8 x 2,25 po, de
4 rondelles plates et de 2 écrous à frein élastique de 3/8 po.
6. Fixez le porte-crosse au tube extérieur à l’aide des 2 boulons de 3/8 x 3,25 po, de 4 rondelles
plates et de 2 écrous à frein élastique de 3/8 po.
7. Boulonnez la plaque de base en acier au tube extérieur, à la verticale ou en utilisant les fentes pour
correspondre à l’angle voulu sur le VU.
8. Coulissez le tube intérieur dans le tube extérieur et boulonnez-le à la hauteur qui convient aux
armes à transporter. Remarque : Le porte-fusil peut-être utilisé sur plusieurs positions différentes.
Trouvez celle qui convient le mieux à vos armes et à votre VU.

Montage du porte-fusil pour VU
2. Fixez le porte-fusil pour VU au plancher du VU à l’aide des 4 boulons de 3/8 x 1,00 po, de
8 rondelles et de 4 écrous à frein élastique de 3/8 po. Il y a lieu de percer les trous.

ATTENTION : Assurez-vous de ne rien percer sous le plancher car ceci pourrait annuler
la garantie du véhicule. Il peut être bon de démonter le plancher et de percer les trous à
l’endroit désiré pour l’emplacement du porte-fusil.

Utilisation du porte-fusil pour VU
• Placez l’arme dans le porte-fusil pour VU Kolpin et maintenez-la à l’aide de la sangle en
caoutchouc.
• Le porte-fusil pour VU est conçu pour transporter vos armes de façon sûre et sans danger d’une
destination à l’autre

ATTENTION : Avant de partir, assurez-vous que les armes sont déchargées et pointées
dans une direction sûre.
ATTENTION : Vérifiez auprès des autorités locales que vous pouvez transporter des
armes hors de leur fourreau.

Only registered users can write reviews. Please, log in or register

* Required Fields