Utility Gear Rail Double Gun Boot Mount by Kolpin

141.74
Ask a question

Regular Price: $157.49

Special Price $141.74

Availability: In Stock

No need to worry about your valuable firearms and optics getting jostled while riding in rough terrain.
Qty:
Add to Wishlist
Verify your product fitment.

SKU: 26510
Brand: Kolpin Powersports

Utility Gear Rail Double Gun Boot Mount by Kolpin

With the Double Gun Boot Mount, you can safely carry two firearms when outfitted with this innovative accessory. Just add a couple of Kolpin Gun Boots®(sold separately) This unique mount provides a snug and secure fit ...no need to worry about your valuable firearms and optics getting jostled while riding in rough terrain.

Utility Gear Rail Double Gun Boot Mount Features:

  • Includes (1) C-clamp,(2) metal Gun Boot mounting plates,(2) Boottector Gun Mounts and all mounting hardware
  • For use with the Utility Gear Rail System (No. 26400 sold separately)
  • Accommodates Gun Boot IV and Gun Boot 6.0 models only (not included)
Warning: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

2017 Fitments

  • 2017 Wildcat 1000
  • 2017 Wildcat 700
  • 2017 Prowler 1000
  • 2017 Pioneer 1000
  • 2017 Pioneer 700
  • 2017 Pioneer 500

2016 Fitments

  • 2016 Wildcat 1000
  • 2016 Wildcat 700
  • 2016 Ranger 570 (Fullsize - Rounded Bars)
  • 2016 Prowler 1000
  • 2016 Prowler 700
  • 2016 Pioneer 1000
  • 2016 Pioneer 700
  • 2016 Pioneer 500
  • 2016 Pioneer 500
  • 2016 Gator XUV 560
  • 2016 Gator XUV 550

2015 Fitments

  • 2015 Wildcat 1000
  • 2015 Wildcat 700
  • 2015 Prowler 1000
  • 2015 Prowler 500/550/700
  • 2015 Pioneer 700
  • 2015 Pioneer 500
  • 2015 Gator XUV 855
  • 2015 Gator XUV 825
  • 2015 Gator XUV 550

2014 Fitments

  • 2014 Wildcat 1000
  • 2014 Wildcat 700
  • 2014 Rhino 700
  • 2014 Ranger 800 (Fullsize)
  • 2014 Ranger 400/500/570/800 (Midsize)
  • 2014 Prowler 1000
  • 2014 Prowler 500/550/700
  • 2014 Pioneer 700
  • 2014 Gator XUV 855
  • 2014 Gator XUV 550

2013 Fitments

  • 2013 Wildcat 1000
  • 2013 Rhino 700
  • 2013 Ranger EV
  • 2013 Ranger Diesel
  • 2013 Ranger 800 (Fullsize)
  • 2013 Ranger 400/500/800 (Midsize)
  • 2013 Prowler 1000
  • 2013 Prowler 500/550/700
  • 2013 Gator XUV 855
  • 2013 Gator XUV 825
  • 2013 Gator XUV 550

2012 Fitments

  • 2012 Ranger Diesel
  • 2012 Ranger 800
  • 2012 Ranger 400/500
  • 2012 Prowler 1000
  • 2012 Prowler 550/700
  • 2012 Gator XUV 825
  • 2012 Gator XUV 625
  • 2012 Gator XUV 550

Utility GearMount_26510_1

MOUNTING INSTRUCTIONS:

1. Mount the flat bracket (item 2) to the C‐Clamp (item 1) making sure that the non‐threaded boss in
the C‐clamp is facing the same direction as the circle cut out on the flat bracket. Use the supplied (4)
¼” x ¾” Truss head bolts and ¼” Nylock Nuts to attach.

2. Mount the Welded Bracket (3) to the C‐Clamp provided with the 26400 Utility Gear Rail System in
the same configuration as Step 1. Use with the hardware that was supplied with the 26400.

3. Insert the Plastic Spline through the center hole cutout in the Flat Bracket and the Welded Bracket.
4. Place the Dust Cover on the back of the Spline. Using the (4) ¼” x ¾” Truss Head Bolts, insert
through the metal bracket and slide through the spline and Dust Cover. Secure the assembly with ¼”
lock nuts, and tighten.

5. Place the Boottector Sheath (7) on the Spline (9). Attach using the Turn Knob (11) provided.

6. The C‐Clamp will then slide onto the Aluminum Extrusion that is included in the 26400. Install the
star turn knob after the bracket is on the rail, adjust to position and tighten.

7. Place Gun Boot into Sheath and secure by using the 4 ‐ Pin Locks provided.

Utility GearMount_26510_2

MODE DE MONTAGE

1. Montez le support plat (2) à la pince en C (1) en vous assurant que le bossage non taraudé dans la pince en C
fait face au cercle découpé dans le support plat. Utilisez les 4 boulons à tête bombée de ¼ x ¾ po avec les
écrous Nylock de ¼ po.

2. Montez le support soudé (3) à la pince en C fournie avec le système à barre d’équipement 26400, en suivant
la même procédure que l’étape précédente et fixez à l’aide des pièces fournies avec le système 26400.

3. Faites passer le manchon à cannelures à travers l’ouverture dans le support plat et le support soudé.

4. Installez le pare‐poussière à l’arrière du manchon et fixez le tout avec 4 boulons à tête bombée de ¼ x ¾ po
que vous faites passer à travers le support métallique, le manchon et le pare‐poussière. Serrez avec les écrous
Nylock de ¼ po.

5. Placez la gaine Boottector (7) sur le manchon (9) et fixez‐la à l’aide du bouton manuel fourni (11).

6. La pince en C coulisse alors dans la barre en aluminium du système 26400. Serrez à l’aide du bouton fourni
(11) après le réglage de la position.

7. Placez le fourreau Gun Boot dans la gaine et fixez à l’aide des 4 goupilles fournies

Only registered users can write reviews. Please, log in or register

* Required Fields