Yamaha Viking Power Steering Kit by SuperATV

649.95
Ask a question
$649.95

Availability: In Stock

The EZ-STEER power steering kit has been designed to make your ride better. Power steering will virtually eliminate bump steer and provide a smooth and consistent ride.
Qty:
Add to Wishlist
Verify your product fitment.

SKU: PS-2-47
Brand: SuperATV

Yamaha Viking Power Steering Kit

EZ-STEER power steering kit for the Yamaha Rhino is the most advanced kit on the market. Designed to make your ride better, EZ-STEER drastically reduces steering effort allowing for longer more enjoyable rides. Along with enhanced steering, power steering will virtually eliminate bump steer and provide a smooth and consistent ride.

Unlike other kits, EZ-STEER has sealed input and output shaft as well as a unique injection molded Control Box seal guaranteeing a 100% watertight kit. What does this mean for you? Submerge, pressure wash, or hose down your UTV. The sealed circuit board is guaranteed to keep you going.

Each EZ-STEER design endures rigorous testing to ensure the highest customer satisfaction in the industry. Maneuver through the rocks and technical terrain with more control. Speed through uneven terrain without wheel jerk. Dominate the mud holes and come out with ease.

Yamaha Viking Power Steering Kit Features:

  • Reduces Steering Effort
  • Eliminates Bump Steer
  • Compact Control Box For Easier Mounting and Installation
  • NO Soldering Required For EZ-Steer Wiring
  • Sealed Input and Output Shafts
  • Watertight Control Box and Connectors

 

*Pricing mentioned in video reflects 2015 pricing which is no longer offered by the manufacturer. The price shown at the top of the page is the lowest retail price offered by the manufacturer, and cannot be found elsewhere for less.

Warning: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

2018 Fitments

  • 2018 Viking

2017 Fitments

  • 2017 Viking

2016 Fitments

  • 2016 Viking

2015 Fitments

  • 2015 Viking 700

2014 Fitments

  • 2014 Viking 700

YamahaViking _PowerSteering Kit_PS-2-47_1

Connections

- Before installing, ensure that all Gaskets in electrical connections are properly seated.
- If Gaskets are not seated use a Flathead Screwdriver to seat.

YamahaViking _PowerSteering Kit_PS-2-47_2

Power Steering will provide multiple improvements to your machine. After installation, it is highly recommend to take
time and learn your machines new handling characteristics and feel.
Key Recommendations:
1. Power Steering Benefits will be noticed as soon as machine is moving.
2. Check steering sensitivity at multiple speeds to best understand new handling characteristics and feel.
3. Without Throttle input, turning Steering Wheel back and forth unnecessarily is not recommended. This action is very
hard on steering components, Tie Rod Ends, and Power Steering unit.
Like all SuperATV products, Power Steering kits were designed with riders in mind.

YamahaViking _PowerSteering Kit_PS-2-47_3

YamahaViking _PowerSteering Kit_PS-2-47_4YamahaViking _PowerSteering Kit_PS-2-47_5

Reverse steps after Power Steering has been completely installed.

 

Keep all hardware and components removed from machine

YamahaViking _PowerSteering Kit_PS-2-47_6

Do not tighten any hardware completely unless noted.

Install and secure Steering Shaft (C) to Rack and Pinion with hardware shown

YamahaViking _PowerSteering Kit_PS-2-47_7

Install Mounting Bracket (B) to Frame with hardware shown.
- Reinstall stock Steering Column with stock hardware.

YamahaViking _PowerSteering Kit_PS-2-47_7

Install and secure U-Joint (D) to stock Steering Shaft with hardware shown.
- Reinstall stock Steering Column with stock hardware.

YamahaViking _PowerSteering Kit_PS-2-47_8

 

Install and secure Motor Mount (M) to Mounting Bracket (B) with hardware shown.
- Secure U-Joint (D) and Steering Shaft (C) to Motor (A) with hardware shown.

YamahaViking _PowerSteering Kit_PS-2-47_10

- Install and secure ECU (E) to Mounting Bracket (B) with hardware shown.
- Connect plugs from Motor (A) to ECU (E)
- Tighten all hardware completely.

YamahaViking _PowerSteering Kit_PS-2-47_11

YamahaViking _PowerSteering Kit_PS-2-47_12

YamahaViking _PowerSteering Kit_PS-2-47_13

YamahaViking _PowerSteering Kit_PS-2-47_14

 

 

 

Only registered users can write reviews. Please, log in or register

* Required Fields