Kawasaki Brute Force 750 Lift Kit 2-inch #18 by SuperATV

99.95
Ask a question
$99.95

Availability: In Stock

These lifts are carefully machined to maintain proper angles on the quad and are engineered for maximum performance with enhanced handling and stability
Qty:
Add to Wishlist
Verify your product fitment.

SKU: LKK4
Brand: SuperATV

Kawasaki Brute Force 750 Lift Kit 2-inch #18

Upgrade your machine with a SuperATV 2" lift kit. This lift kit is an easy, bolt-on system that when installed with stock tires and wheels increases your front and rear ground clearance by about 2" on average. When combined with larger tires and wheels your machine becomes even more EXTREME. Perfect for any type of riding, whether you are on the trails, farm, hills, creek, or sand. You are sure to stand out and out perform.

SuperATV lifts are carefully machined to maintain proper angles on the quad and are engineered for maximum performance with enhanced handling and stability. Components are precision cut and zinc plated for extreme durability.

Kawasaki Brute Force 750 Lift Kit 2-inch #18 Features:

  • Front and Rear Lift
  • Zinc Plated for Extreme Durability
  • Room for Larger Tires
  • Improved Handling
  • Complete with all necessary hardware and easy-to-follow instructions

2014 Fitments

  • 2014 Brute Force 750

2013 Fitments

  • 2013 Brute Force 750

2012 Fitments

  • 2012 Brute Force 750

2011 Fitments

  • 2011 Brute Force 750

2010 Fitments

  • 2010 Brute Force 750

2009 Fitments

  • 2009 Brute Force 750

2008 Fitments

  • 2008 Brute Force 750

2007 Fitments

  • 2007 Brute Force 750

2006 Fitments

  • 2006 Brute Force 750

Kawasaki Brute Force_2” Lift Kit_LKK4_1

Kawasaki Brute Force_2” Lift Kit_LKK4_2

        FRONT:

        Do not tighten hardware completely unless noted. Keep all components removed from machine.

       1. Raise front of machine off ground, secure with jack stands, and remove Wheels. Remove top Shock hardware.

       2. Locate hole in Frame and install (1) each M8-1.25 x 25mm Lg. HHCS, M8 Flat Washer, and M8-1.25 Nylock Nut. See Figs. 1 - 2.

      3. Install Front Bracket (H) to machine. Ensure that M8 Flat Washer, previously installed, is under Front Bracket (H). Secure with M10-1.50 x 55mm Lg. HHCS and           M10-1.5 Nylock Nut. See Figs. 3 - 3a. Optional; (2) M10 Flat Washers can be installed.

      4. Reinstall Shock with stock hardware.

      5. Tighten hardware completely and repeat steps for opposite side.

      6. Reinstall Wheels.

Kawasaki Brute Force_2” Lift Kit_LKK4_2.1

Kawasaki Brute Force_2” Lift Kit_LKK4_3

         REAR:

         Do not tighten hardware completely unless noted. Keep all components removed from machine.

        1. Raise rear of machine off ground, secure with jack stands, and remove Wheels. Remove bottom Shock hardware.

        2. Install Rear Shock Mount Brackets (J) to A-Arm: (1) will install to outside of stock Shock Mount and (1) to inside. See Figs. 4 - 4a. - Secure with M10-1.50 x                 55mm Lg. HHCS, M10-1.50 Nylock Nut, (2) M10 Flat Washers, and Spacer (L). See Figs. 4 - 4a.

       3. Reinstall Shock with M10-1.50 x 55mm Lg. HHCS, M10-1.50 Nylock Nut, and (2) M10 Flat Washers. See Figs. 4 - 4a.

       4. Install Sway Bar Spacer (K), under Sway Bar Mount, with M8-1.25 x 35mm Lg. HHCS, M8 Flat Washers, and M8-1.25 Nylock Nuts. See Fig. 5.

       5. Tighten hardware completely and repeat steps for opposite side. 6. Reinstall Wheels.  

Kawasaki Brute Force_2” Lift Kit_LKK4_4

Only registered users can write reviews. Please, log in or register

* Required Fields