Grizzly 700 2'' Lift Kit by SuperATV

114.95
Ask a question
$114.95

Availability: In Stock

These lifts are carefully machined to maintain proper angles on the quad and are engineered for maximum performance with enhanced handling and stability.
Qty:
Add to Wishlist
Verify your product fitment.

SKU: LK-Y-G700
Brand: SuperATV

Grizzly 700 2'' Lift Kit

Upgrade your machine with a SuperATV 2" lift kit. This lift kit is an easy, bolt-on system that when installed with stock tires and wheels increases your front and rear ground clearance by about 2" on average. When combined with larger tires and wheels your machine becomes even more EXTREME. Perfect for any type of riding, whether you are on the trails, farm, hills, creek, or sand. You are sure to stand out and out perform.

SuperATV lifts are carefully machined to maintain proper angles on the quad and are engineered for maximum performance with enhanced handling and stability. Components are precision cut and zinc plated for extreme durability.

Grizzly 700 2'' Lift Kit Features:

  • Front and Rear Lift
  • Extreme Durability
  • Room for Larger Tires
  • Complete with all necessary hardware and easy-to-follow instructions

2013 Fitments

  • 2013 Grizzly 550/700

2012 Fitments

  • 2012 Grizzly 550/700

2011 Fitments

  • 2011 Grizzly 550/700

2010 Fitments

  • 2010 Grizzly 550/700

2009 Fitments

  • 2009 Grizzly 550/700

2008 Fitments

  • 2008 Grizzly 660/700

2007 Fitments

  • 2007 Grizzly 660/700

GRIZZLY_LiftKit_LK-Y-G700_1

FRONT: Do not tighten hardware completely unless noted.
1. Raise front of machine and secure with jack stands. Remove Wheels.
2. Remove top hardware from Shock.
3. Install Front Lift Bracket (A) to outside of factory mounting bracket. See Figs. 1 - 1a.
4. Front Lift Tabs (B) install to inside of factory mounting bracket. Secure with (1) each M10-1.50 x
55mm Lg. HHCS, M10 Flat Washer, Spacer (E), and M10 Nylock Nut. Repeat for opposite side. See
Figs. 1 - 1a.
5. Reinstall Shocks to new Lift Brackets and secure with (1) each M10-1.50 x 55mm Lg. HHCS, M10
Flat Washer, and M10 Nylock Nut. See Figs. 1 - 1a.
6. Tighten hardware completely and reinstall Wheels.

GRIZZLY_LiftKit_LK-Y-G700_2

REAR: Do not tighten hardware completely unless noted.
1. Raise rear of machine and secure with jack stands. Remove Wheels.
2. Remove top hardware from Shock. Hint: Loosening bottom hardware will help when reinstalling.
3. Install Rear Lift Bracket (D) to outside of factory mounting bracket. See Figs. 3 - 3a.
4. Rear Lift Tabs (C) install to inside of factory mounting bracket. Secure with (1) each M10-1.50 x
55mm Lg. HHCS, M10 Flat Washer, Spacer (E), and M10 Nylock Nut. Repeat for opposite side. See
Figs. 3 - 3a.
5. Reinstall Shocks to new Lift Brackets and secure with (1) each M10-1.50 x 55mm Lg. HHCS, M10
Flat Washer, and M10 Nylock Nut. See Fig. 3a.
6. Tighten hardware completely and reinstall Wheels.

GRIZZLY_LiftKit_LK-Y-G700_3

Only registered users can write reviews. Please, log in or register

* Required Fields