Honda Rincon 650/680 2" Lift Kit by SuperATV

79.95
$79.95

Availability: In Stock

SuperATV lifts are carefully machined to maintain proper angles on the quad and are engineered for maximum performance with enhanced handling and stability. Components are precision cut and zinc plated for extreme durability.
Qty:
Add to Wishlist
Verify your product fitment.

SKU: LKH2
Brand: SuperATV

Honda Rincon 650/680 2" Lift Kit

Upgrade your Honda Rincon with a SuperATV 2'' lift kit. This lift kit is an easy, bolt-on system that when installed with stock tires and wheels increases your front and rear ground clearance by about 2'' on average. When combined with larger tires and wheels your machine becomes even more EXTREME. Perfect for any type of riding, whether you are on the trails, farm, hills, creek, or sand. You are sure to stand out and out perform.

SuperATV lifts are carefully machined to maintain proper angles on the quad and are engineered for maximum performance with enhanced handling and stability. Components are precision cut and zinc plated for extreme durability.

Honda Rincon 650/680 2" Lift Kit Features:

  • Front and Rear Lift
  • Zinc Plated for Extreme Durability
  • Room for Larger Tires
  • Improved Handling
  • Complete with all necessary hardware and easy-to-follow instructions

2017 Fitments

  • 2017 Rincon 680

2016 Fitments

  • 2016 Rincon 680

2015 Fitments

  • 2015 Rincon 680

2014 Fitments

  • 2014 Rincon 680

2013 Fitments

  • 2013 Rincon 680

2012 Fitments

  • 2012 Rincon 680

2011 Fitments

  • 2011 Rincon 680

2010 Fitments

  • 2010 Rincon 680

2009 Fitments

  • 2009 Rincon 680

HondaRincon_Lift Kit_LKH2_1

Front: Do not tighten hardware completely unless noted. Keep all components removed from machine.
1. Raise ATV off ground, secure on jack stands, and remove Wheels.
2. Remove upper Shock from Frame.
3. Install Flat Bracket (A) to inside of factory mount (towards front of ATV). Install M10-1.50 x 45mm Lg.
FHCS and Spacer (H). See Figs. 1 - 1a.
4. Install Formed Bracket, R (B) to outside of factory mount (towards rear of ATV). Install M10-1.50
Nylock Nut. See Figs. 1 - 1a.
5. Repeat steps for opposite side.
6. Reinstall Shocks to Brackets with factory hardware.
7. Tighten hardware completely and reinstall Wheels.

HondaRincon_Lift Kit_LKH2_2

Rear: Do not tighten hardware completely unless noted. Keep all components removed from machine.
1. Raise ATV off ground, secure on jack stands, and remove Wheels.
2. Use a Spring Compressor, or Ratchet Straps, and compress Spring on Shock. Compress just
enough to allow Spring Spacer (D) installation. See Figs. 2 - 3.
3. Remove hardware securing bottom of Shock.
4. Remove and discard Plate from bottom of Spring and insert machined end of Spring Spacer (D).
See Figs. 2 - 3.
5. Slowly decompress Spring to secure Spring Spacer (D). See Fig. 3.
- Reinstall Shock with stock hardware.
6. Repeat steps for opposite side.
7. Tighten hardware completely and reinstall Wheels.

HondaRincon_Lift Kit_LKH2_3

Only registered users can write reviews. Please, log in or register

* Required Fields