SKU: 53560-GU
Brand: Kolpin Powersports
The Stealth 2.0 Heat Shield by Kolpin Powersports provides protection from heat and exhaust from your Stealth Exhaust 2.0 (sold separately). This shield features a stylish wrap around design and installs easily.
Heat Shield Mounting Instructions:
1. The heat shield attaches using the Mounting Band (2)
included in the box and the other Mounting Band that came
with your Kolpin Stealth Muffler. Use the 4 Carriage Bolts
(7) on each side (top and bottom) of the Mounting Bands as
shown in the picture.
2. The Kolpin Heat Shield has three slots (top and bottom) to make
it easier to center the shield over the muffler, no matter what position
your muffler is located.
3. To make the installation easier, barely start the 4 nuts on the Carriage bolts. Once
all four are “connected,” position the Heat Shield where you want it and then tighten
the 4 nuts and bolts.
Mode de montage de l’écran pare-chaleur
1. Le pare-chaleur se fixe à l’aide des bandes de montage (2)
comprises dans l’emballage et de l’autre bande de montage
fournie avec le silencieux Stealth Kolpin. Utilisez les
4 boulons ordinaires (7) de chaque côté (haut et bas) des
bandes de montage (voir schéma).
2. L’écran pare-chaleur Kolpin a trois fentes (en haut et en bas) pour faciliter
son centrage sur le silencieux, quelle que soit la position du silencieux.
3. Pour faciliter l’installation, commencez à visser (sans serrer) les
4 écrous sur les boulons ordinaires. Une fois posés, placez l’écran parechaleur
où vous le désirez, puis serrez les 4 écrous sur les boulons.