Brand: Kolpin Powersports
The Rhino Grips offer the most-advanced attachment system for transporting gear safely and securely on your ATV or UTV. They are the only gear grips that feature a 360 degree rotating and multi-angle design adjustable without tools!
Yamaha Rhino Grips' heavy-duty design will keep your firearm or other gear securely in place and cushion it from any jolts or shocks. the unmatched design provides superior gripping power and cushioning support that reduces side-to-side movement. Strong, flexible static grips and rubber straps hold tool and gear of various configurations. The possibilities are endless!
Rhino Grips come in a variety of mounting options, from suction cup to fully rotating and adjustable bases making installation a snap regardless of where and how you desire to mount them.
These grips are designed to quickly and easily mount to the rear rack or roll cage of an ATV or UTV-they will fit any tubing size from Ø7/8” to Ø2.00”! Note: Hardware provided is based on the biggest tube diameter. You may want to cut the excess threads from the grip to prevent damage to your machine.
To tilt the grip simply loosen the adjustment knob, tilt the grip to the angle of your choice, and retighten. Lighter objects ONLY can be carried in the full-tilt position. The grip can be used in the vertical and horizontal positions. NOTE: Guns/Heavy objects should not be carried with the grip in the full-tilt position!
Mounting Instructions –
Position the Rhino Grip mounting bases on the roll bar/rack where desired.
1. Run the ¼” bolts provided through the main base and through the backer plate. Secure with nylon nut. Repeat three more times.
2. Tighten the (4) ¼”-20 x 2.25” (UTV) or 1.50” (ATV) truss head bolts evenly. Note: Be sure not to over tighten the bolts, as too much torque can over stress the base and cause the grip to fail.
3. Insert the Rhino grip into the mounting base and position as desired. NOTE: Grip can rotate 360° to accommodate any angle, and the grip can tilt 0° to 180° at 45° increments.
4. Secure the grip to the mounting base using the plastic clip provided. Insert the clip on the smooth side of the base ONLY or breakage can occur!