Polaris Sportsman Ace Half Windshield by EMP

88.99
Ask a question
$88.99

Availability: Ships in 3-5 Days

Made from 3/16" thick Polycarbonate to ensure that it will not break like cheaper Acrylic windshields
Qty:
Add to Wishlist
Verify your product fitment.

SKU: 12486
Brand: Extreme Metal Products

Polaris Sportsman Ace Half Windshield by EMP

Half windshields are a good alternative to full windshields,because they block the wind but still allow you to see when the it gets dusty or muddy.Made from 3/16" thick Polycarbonate (LEXAN) to ensure that it will not break like cheaper Acrylic windshields. Our Rubber Patent Pending "UTV Fast Straps" allow you to remove it without any tools.Simply unhook the rubber straps and remove your windshield.We leave the Polycarbonate Manufacturer's protective coating on until you get it,so that you can easily read that it is Polycarbonate.

Polaris Sportsman ACE Half Windshield Features:

  • 3/16" Thick Lexan (Polycarbonate)
  • Rubber Edge Trim protects your hood
  • Includes: (4) Patent Pending "Fast Straps"
  • Rubber straps will not rattle, rust or scratch your cage

Warning: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

2017 Fitments

  • 2017 Sportsman ACE 570/900 SP

2016 Fitments

  • 2016 Sportsman ACE
  • 2016 Sportsman ACE 900 SP
  • 2016 Sportsman ACE 570/900 SP
  • 2016 Sportsman ACE 570

2015 Fitments

  • 2015 Sportsman ACE

2014 Fitments

  • 2014 Sportsman ACE

Polaris ACE Hard Coated Half Shield

PIN: 12486

Fits: 2014 ACE

Includes:

1. ( 1) 12486-01 Windshield

Hardware Kit:

1. (4) 11651 Rubber Fast Straps

2. (1) 3/16" x 29" Long Edge Trim

3. ( 1) Logo Sticker

Instructions:

1. Peal back the protective coating along
both sides of the bottom edge. Only
about an inch up.

2. Slide the Rubber Edge trim over the bottom
edge. Make sure you have it centered.

3. Bolt the Rubber Straps to the slots. Do
not tighten yet.

4. Mount the assembly to the cage by wrapping
the rubber straps around the tubing
and hooking them on to the plastic pins.

5. Once, you have the straps in the correct
location tighten the hardware.

Half Windshield_12486

Only registered users can write reviews. Please, log in or register

* Required Fields