Polaris RZR XP1000 and RZR 900 Aluminum Roof by EMP

Ask a question

Availability: Ships in 3-5 Days

Protect yourself and your passenger from the rain,sleet,sun and snow with this stylish aluminum top.
Add to Wishlist
Verify your product fitment.

SKU: 12366
Brand: Extreme Metal Products

RZR XP1000 and RZR 900 Aluminum Roof

Protect yourself and your passenger from the rain,sleet,sun and snow with this stylish aluminum top.Fabricated from thick .100” 5052 Aircraft Grade Aluminum to ensure a rattle free ride.Included is a LED Dome light and aluminum housing that will light your cockpit for up to 100 hours on the supplied batteries.Attaches in minutes and bolts on with rubber coated straps.Supplied foam gaskets go between the top and your cage.

RZR XP1000 and RZR 900 Aluminum Top Features:

  • Laser cut and CNC formed to ensure a perfect fit.
  • Made from nearly .100” Thick 5052 Aircraft Aluminum.
  • Extends past overhead side bars to protect from rain.
  • Sides are hemmed making a smooth edge.
  • Rear rain gutter.
  • Battery operated LED Dome light and housing.
  • Laser Cut Stainless Steel logo plate.
  • Ships UPS or Fed EX.
  • Made In Cleveland, Ohio.
Warning: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

2018 Fitments

  • 2018 RZR 900 XC

2017 Fitments

  • 2017 RZR 900 XC

2016 Fitments

  • 2016 RZR XP 1000
  • 2016 RZR 1000 S
  • 2016 RZR 900
  • 2016 RZR 900 XC
  • 2016 RZR 900 S

2015 Fitments

  • 2015 RZR 1000
  • 2015 RZR 1000 S
  • 2015 RZR 900
  • 2015 RZR 900 XC
  • 2015 RZR 900 S

2014 Fitments

  • 2014 RZR XP 1000

RZR XPlOOO Aluminum Top

P/N: 12366 


I. (1) Front Section

2. (l) RearSection

Hardware Kit:

I. (2) I" x I" x 38" Long Adhesive Backed Foam Gasket (sides)

2. (1) I" x I" x 20" Long Adhesive Backed Foam Gasket (Back)

3. (I) I" x I" x 1 O" Long Adhesive Backed Foam Gasket (front)

4. (I) 1/8" x l" x 42-1/2" Long Gasket (goes between two pieces)

5. (8) 1/4-20 x I" Phillips Truss Head Screws-Black

6. (8) 1/4-20 x 3/4" Phillips Truss Head Screws-Black

7. ( 16) I /4-20 Nylon Nuts

8. (8) 1-1/4"x l/4"BlackFenderWashers-Black

9. (16) 1/4 Flat Washers

10. (4) 1-3/4" Rubber Coated Straps

11. (1) Dot It light

12. (1) Aluminum Housing for the Light (10093)

13. (2) 10-32 x 1/2" Truss Head Screw-Black

14. ( 15) Rubber Screw Cap .234" I.D. x 1/2" Long-Black

15. (I) Large Logo Sticker

RZR XPlOOO_Aluminum Top_12366_1


I. Stick the 1/8" thick gasket to the rear section (see fig. I).

2. Put the light in the aluminum housing and bolt it to the front section using the 10/32 screws (see fig. 2).

3. Bolt the two pieces together using the 3/4" long screws, nylon nuts and washers (see fig 3) DO NOT TIGHTEN YET. LEA VE LOOSE SO YOU CAN LINE UP THE OTHER HOLES TO THE CAGE.

4. Stick the I" x I" foam gasket to the cage. The 38" strips go on the two sides, 20" on the rear, and the 10" in the front (see fig.4).

5. Bolt the top to the holes in the cage using (4) I" long screws, large black washers, 1/4" small washers and the nylon nuts. These will bolt to the existing holes in the cage. In the front you will have to remove the stock Torx bolts and retainers. The large washers go on top. Do not tighten yet.

6. Using the (4) rubber coated straps, large washers, small washers, and nylon nuts. Attach the top to your cage using the remaining holes.

7. Tighten all fasteners at this time.

RZR XPlOOO_Aluminum Top_12366_2

RZR XPlOOO_Aluminum Top_12366_3

RZR XPlOOO_Aluminum Top_12366_4

RZR XPlOOO_Aluminum Top_12366_5

RZR XPlOOO_Aluminum Top_12366_6

Customer Reviews

1 Item(s)

per page
Great Product Review by Aluminium top
A perfect roof for the machine. I would recommend it to all (Posted on 8/5/2015)

1 Item(s)

per page

Only registered users can write reviews. Please, log in or register

* Required Fields