Polaris RZR Rock Sliding Nerf Bars (Wrinkle) by SuperATV

199.95
Ask a question
$199.95

Availability: In Stock

SuperATV's rock sliders are designed to help protect the sides and bottom of the machine from damage and debris
Qty:
Add to Wishlist
Verify your product fitment.

SKU: NB-P-RZR-00
Brand: SuperATV

Polaris RZR Rock Sliding Nerf Bars (Wrinkle) by SuperATV

Compliment your RZR by adding protection to its sides and undercarriage.SuperATV's rock sliders are designed to help protect the sides and bottom of the machine from damage and debris.These aggressive nerf bars feature a black,powder coat finish that is rugged enough to handle the most intense riders.

All mounting hardware is included as well as detailed instructions.

Warning: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

2017 Fitments

  • 2017 RZR 570 /570 S

2016 Fitments

  • 2016 RZR 570

2015 Fitments

  • 2015 RZR 570

2014 Fitments

  • 2014 RZR 800
  • 2014 RZR 800 S
  • 2014 RZR 570

2013 Fitments

  • 2013 RZR 800
  • 2013 RZR 800 S
  • 2013 RZR 570

2012 Fitments

  • 2012 RZR 800
  • 2012 RZR 800 S
  • 2012 RZR 570

2011 Fitments

  • 2011 RZR 800
  • 2011 RZR 800 S

2010 Fitments

  • 2010 RZR 800
  • 2010 RZR 800 S

2009 Fitments

  • 2009 RZR 800
  • 2009 RZR 800 S

2008 Fitments

  • 2008 RZR 800

Polaris RZR_Nerf Bars_NB-P-RZR-00_1

        Do not tighten hardware completely unless noted. Pre-Tapping holes may ease installation even though Self Tapping Bolts are included in kit.

        1. Install Mounting Bracket (C) to Frame with 5/16”18 x 1” Lg. Self Tapping Screws.

       - Mounting location under machine around front of Seat. See Figs. 1 - 1a.

       2. Install rear of Nerf Bar (A) to Frame with 5/16”-18 x 1” Lg. Self Tapping screws.

       - Mounting location under machine around rear of Seat. See Figs. 2 - 2a.

       3. Install Nerf Bar (A) to Mounting Bracket (C) with M8-1.25 x 20mm Lg. HHCS, M8 Flat Washers, and M8-1.25 Nylock Nuts. See Figs. 3 - 3a.

      4. Repeat steps for opposite side, align to machine, and tighten hardware completely.

Polaris RZR_Nerf Bars_NB-P-RZR-00_2

Polaris RZR_Nerf Bars_NB-P-RZR-00_3

 

Only registered users can write reviews. Please, log in or register

* Required Fields