Polaris RZR 900/1000 Clear Half Windshield by SuperATV

99.95
Ask a question
$99.95

Availability: In Stock

Windshields are hard coated on both sides for extreme durability.
Qty:
Add to Wishlist
Verify your product fitment.

SKU: HWS-P-RZR1K-001-75
Brand: SuperATV

Polaris RZR 900/1000 Clear Half Windshield by SuperATV

Help protect you and your passenger from sticks and other flying debris while blazing the trail with a SuperATV windshield - the best off-road windshield on the market. With many protection and tint options to choose from, each windshield is a super tough polycarbonate construction with a bottom seal that’s contoured to your ride’s design. Our tinted and non-tinted, scratch resistant, 1/4” thick AR is much stronger than your average UTV windshield. We’ve also beefed up the scratch resistance by hard coating this style windshield on both sides for years of use. If you don’t need the extra protection, we also offer a non-scratch resistant option with a dark tint.

Polaris RZR 900/1000 Clear Half Windshield Feature:

  • 1/4” AR abrasion resistant polycarbonate available with and without tint.
  • windshields are hard coated on both sides for extreme durability.
  • Protects against chemical and UV attack.
  • Contoured to hood with full length rubber seal for a great fit.
  • Easy to install – comes with all necessary hardware and instructions.
  • Can be used with soft or hard tops.
  • Add an LED Light Kit to brighten your night riding!.
  • Windshield height: 8 3/4" (220mm).
Warning: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

2018 Fitments

  • 2018 RZR XP Turbo
  • 2018 RZR XP 1000
  • 2018 RZR 1000 S
  • 2018 RZR 900
  • 2018 RZR 900 XC
  • 2018 RZR 900 S

2017 Fitments

  • 2017 RZR XP Turbo
  • 2017 RZR XP 1000
  • 2017 RZR 1000 S
  • 2017 RZR 900
  • 2017 RZR 900 XC
  • 2017 RZR 900 S

2016 Fitments

  • 2016 RZR XP Turbo
  • 2016 RZR XP 1000
  • 2016 RZR XP 1000 4
  • 2016 RZR 1000 S
  • 2016 RZR 900
  • 2016 RZR 900 XC
  • 2016 RZR 900 S

2015 Fitments

  • 2015 RZR 1000
  • 2015 RZR 1000 S
  • 2015 RZR 1000 4
  • 2015 RZR 900
  • 2015 RZR 900 XC
  • 2015 RZR 900 S

2014 Fitments

  • 2014 RZR XP 1000
  • 2014 RZR XP 1000 4

Polaris RZR® 1000_Half Windshield_HWS-P-RZR1K-001-75_1

 

            - Insert Rubber Grommets into holes in Windshield. Tip; apply soapy water to Rubber Grommets.

            - Install Inserts into Rubber Grommets.

Polaris RZR® 1000_Half Windshield_HWS-P-RZR1K-001-75_2

         install Seal to bottom edge of Windshield Seal

       - Insert Rubber Grommets into holes in Windshield. Tip; apply soapy water to Rubber Grommets.

       - Install Inserts into Rubber Grommets. Rubber Grommet 4x Insert 4x To ease installation, soak Seal in hot water before cutting or installing to increase flexibility.

 

 

        - Install Clamps around Bars.

       - Secure Windshield and Clamps with provided Bolt, Washer, and Nut.

       - Before tightening completely, push down on top of Windshield so Seal is in contact with Hood.

Polaris RZR® 1000_Half Windshield_HWS-P-RZR1K-001-75_3

 

             Windshield Cleaning:

           - Do not use a dry cloth, or your hands, to wipe off Windshield; Scratching will occur.

           - Do not use window cleaning fluids (Windex, 409, etc) or any solvents (gasoline, denatured alcohol, acetone, etc).

           - Never use abrasive cleaners, abrasive pads, or gritty cloths.

           1. Thouroughly rinse Windshield to float off dirt and mud.

           2. Using a soft cloth, or microfiber cloth, clean Windshield with warm water and a gentle detergent. Baby shampoo or hand washing soap are recommended.

          3. To prevent water spots, use a chamois and blot Windshield dry

Only registered users can write reviews. Please, log in or register

* Required Fields