Polaris RZR 2" Receiver Hitch by Kolpin

102.38
Ask a question

Regular Price: $126.78

Special Price $102.38

Availability: In Stock

Add towing capabilities to your Polaris RZR!
Qty:
Add to Wishlist
Verify your product fitment.

SKU: 90260
Brand: Kolpin Powersports

Polaris RZR 2" Receiver Hitch by Kolpin

This heavy-duty,frame-mounted receiver hitch was custom designed for ground engaging and towing capabilities.

Polaris RZR 2" Receiver Hitch Features:

  • Custom designed for the Polaris RZR
  • For off-road use only
  • Fits model years 2008 to 2011
  • Will not fit the RZR 570 or RZR 900XP
Warning: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

2017 Fitments

  • 2017 RZR 570 /570 S

2016 Fitments

  • 2016 RZR 570

2015 Fitments

  • 2015 RZR 570

2014 Fitments

  • 2014 RZR 800
  • 2014 RZR 800 S
  • 2014 RZR 570

2013 Fitments

  • 2013 RZR 800
  • 2013 RZR 800 S

2012 Fitments

  • 2012 RZR 800
  • 2012 RZR 570

2011 Fitments

  • 2011 RZR 800

2010 Fitments

  • 2010 RZR 800

2009 Fitments

  • 2009 RZR 800

2008 Fitments

  • 2008 RZR 800

Polaris RZRHitch_90260_1

Mounting Specific Instructions:
1. If your RZR has a BOLT ON Hitch you will need to REMOVE the three Bolts and Nuts that
attach it to the rear frame member. If your machine has a WELDED on hitch, nothing needs
to be changed.
2. Next, you will notice that the (4) holes on the plate of the 2” RZR hitch line up with the (4)
holes on the RZR A-arm frame support brackets. Take the (4) - 5/16” Hex Head Bolts and
place them through the hitch utilizing the (8) Washers and (4) Nuts provided.
3. Tighten all hardware securely!
4. Place the 5/8” x 3.00” Bent hitch pin through the hitch and secure using the R-Clip!

Polaris RZRHitch_90260_2

Polaris RZRHitch_90260_3

Mode de montage spécifique
1. Si votre RZR est muni d’un attelage BOULONNÉ, il faut DÉPOSER les 3 boulons qui le
maintiennent à l’arrière du châssis. Si l’attelage est SOUDÉ, rien ne doit être changé.
2. Vous remarquerez ensuite que les trous sur la plaque de l’attelage RZR de 2 po s’alignent
avec les 4 trous dans les ferrures du bras en A du châssis. Faites passer 4 boulons à 6 pans
de 5/16 po à travers l’attelage et serrez avec les 8 rondelles et 4 écrous fournis.
3. Serrez bien toute la boulonnerie!
4. Faites passer la cheville d’attelage courbe de 5/8 x 3 po à travers l’attelage et fixez avec la
goupille en R!

Polaris RZRHitch90260_4

Only registered users can write reviews. Please, log in or register

* Required Fields