Polaris Ranger Tip Out Windshield (XP 800) by SuperATV

499.95
Ask a question
$499.95

Availability: In Stock

The Polaris Ranger Tip Out Windshield (XP 800) by SuperATV features super-durable 1/4” AR abrasion-resistant polycarbonate construction! This Polaris Ranger XP 800 windshield makes it easy for you to determine the level of visibility, protection, and comfort for you and your riders with its simple, tip out design! You won't regret picking up this fine product from SuperATV!
Qty:
Add to Wishlist
Verify your product fitment.

SKU: FWS-P-RAN09XP-002-70
Brand: SuperATV

Polaris Ranger Tip Out Windshield (XP 800) by SuperATV

This Polaris Ranger Tip Out Windshield is full-size and made from scratch-resistant AR polycarbonate. The lower rubber seal of the windshield contours to the hood of the Polaris Ranger perfectly for a functionally stylish look!

Protect your passengers from flying wind, debris, and rain with this full-size polycarbonate Polaris Ranger XP 800 windshield. Additional scratch resistance is provided by a hard coating on both sides of the windshield. This flip windshield allows you to determine the degree of visibility, protection, and comfort you need. It is easy to install and comes with all the required hardware and instructions. The windshield can also be used with both hard and soft tops.

Polaris Ranger Tip Out Windshield (XP 800) Features:

  • 1/4” AR abrasion resistant polycarbonate available with and without tint.
  • Windshields are hard coated on both sides for extreme durability.
  • Protects against chemical and UV damage
  • Contoured to the hood with full-length rubber seal for a great fit.
  • Easy to install – comes with all necessary hardware and instructions.
  • Can be used with soft or hard tops.
  • Add an LED Light Kit to brighten your night riding.
Warning: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

2015 Fitments

  • 2015 Ranger 800 (Fullsize)

2014 Fitments

  • 2014 Ranger Crew 800
  • 2014 Ranger 800 (Fullsize)

2013 Fitments

  • 2013 Ranger Crew 800
  • 2013 Ranger 800 (Fullsize)

2012 Fitments

  • 2012 Ranger Crew 800
  • 2012 Ranger 800

2011 Fitments

  • 2011 Ranger Crew 800
  • 2011 Ranger 800

2010 Fitments

  • 2010 Ranger Crew 800
  • 2010 Ranger 800

PolarisRanger_FlipWindshield_FWS-P-RAN09XP-002-70_1PolarisRanger_FlipWindshield_FWS-P-RAN09XP-002-70_2PolarisRanger_FlipWindshield_FWS-P-RAN09XP-002-70_2

-     Do not use a dry cloth, or your hands, to wipe off Windshield; Scratching will occur.

-     Do not use window cleaning fluids (Windex, 409, etc) or any solvents (gasoline, denatured alcohol, acetone, etc).

-     Never use abrasive cleaners, abrasive pads, or gritty cloths.

  1. Thouroughly rinse Windshield to float off dirt and mud.
  2. Using a soft cloth, or microfiber cloth, clean Windshield with warm water and a gentle detergent. Baby shampoo or hand washing soap are recommended.
  3. To prevent water spots, use a chamois and blot Windshield dry.

Do not tighten hardware completely unless noted:

1. Install (4) Clamps (F) to Lower Windshield (B) with M6-1.0 x 20mm Lg. BHCS and M6 Washers. See Fig. 1.

-       Install Right/Left Supports (G)(H) to Lower Windshield (B) with M6-1.0 x 20mm Lg. BHCS, M6 Washers, and M6-1.0 Nylock Nuts. See Figs. 1 - 1a.

-       Secure Right/Left Supports (G)(H) to Clamps (F) with M8-1.25 x 15mm Lg. BHCS. See Fig. 1a.

2.    Install provided Hood Seal to Lower Windshield (B). See Fig. 1.

3.    Install Catch, part of Latch Assembly (D), to Lower Windshield (B); place Latch Support (J) on bottom section of Lower Windshield (B) and secure with M6-1.0 x 20mm Lg. BHCS and M6-1.0 Nylock Nuts. See Figs. 1a - 1b.

4.    Install Lower Windshield (B) to Roll Cage with bolts included with Clamps (F). See Figs. 1b - 2.

-     Install provided Gasket to Lower Windshield (B). See Fig. 2.

5. Install Pivot Blocks (E) to Upper Windshield (A) with M6-1.0 x 20mm Lg. BHCS, M6 Washers, and M6-1.0 Jam Nuts. See Fig. 3a.

5.    Install Handle and Support, part of Latch Assembly (D), to Upper Windshield (A) with M6-1.0 x 20mm Lg. BHCS and M6-1.0 Nylock Nuts. See Fig. 3.

6.    Assemble Gas Strut (C) and Support (K) to Clamp (F) and set aside. See Fig. 3b. Repeat for opposite side.

7.    Install Gas Strut Assembly created in Step 6:

-     Secure Support (K) and Clamp (F) to Pivot Block (E) with M8 Shoulder Bolt. See Fig. 4.

8.    Install Upper Windshield (A) to Roll Cage with bolts included with Clamps (F). See Fig. 5.

9.    Secure Gas Struts (C) to Pivot Blocks (E) with M8 Nylock Nuts. See Fig. 5.

10.Align Windshield assembly to machine making sure that Seal, on Lower Windshield (B), is in contact with Hood. See Fig. 2.

 

11.Tighten hardware completely.PolarisRanger_FlipWindshield_FWS-P-RAN09XP-002-70_4PolarisRanger_FlipWindshield_FWS-P-RAN09XP-002-70_5PolarisRanger_FlipWindshield_FWS-P-RAN09XP-002-70_6PolarisRanger_FlipWindshield_FWS-P-RAN09XP-002-70_7

 

 

 

 

 

 

 

 

 


Only registered users can write reviews. Please, log in or register

* Required Fields