Polaris Ranger XP900 / XP1000 and Full Size 570 Ranger (Pro-Fit Bars only) Rear Winch Mount by EMP

Polaris Ranger Rear Winch Mount by EMP

This Polaris Ranger Rear Winch Mount is CNC formed to provide a perfect fit and is made from sturdy, laser cut 3/16-inch American steel. You can install both regular and wide spool winches up to 4,000 lbs. utilizing this rear winch mount by Extreme Metal Products.

No matter how stuck you get your Polaris Ranger, this rear winch mount can handle all the torque and extreme flexing your towing needs throw at it. The Polaris Ranger 900 Rear Winch Mount also allows you to operate your vehicles tilting dump bed without obstruction! Easy to install, this rear winch mount reuses the stock control arm bolts. 

Polaris Ranger Rear Winch Mount Features:

• Laser Cut from 3/16" thick American Steel
• CNC Formed to ensure a precision fit
• Powder Coated Black for superior protection
• Two winch bolt patterns to accept winches up to 4000 lbs.
• Accepts both regular spool (4-7/8" wide x 3" deep) and wide spool (6-5/8" wide x 3" deep) winches
• UTV bed will still dump with a winch on the rear
• Pictured with a Warn 4000 lb winch
• Mounts with stock control arm bolt.
• Made in the USA

Note: Last picture is to show that the bed dumps with mount installed.

Ranger Rear Winch Mount

PIN: EMP-12005

Fits: 2015 Full-Size Ranger 570 and 2013-2015 Ranger XP900 

Must be installed by a professional technician.

Includes:

(I) Rear Winch Mount

Installation:

I. Set parking brake.

2. .Jack up the rear or your vehicle and set on jack stands.

3. Remove the (4) rear control c1rm bolts one at a time and re-insert them from the front so the nut would go to1Vards the rear. This will allolV you to install th..: winch plate easily.

4. Set the new mounting plate on the lour bolts. Apply a thread locker (such as l.ucktite) the bolts and then fasten with the four stock nuts.

5. Install the winch as per th.: winch manufacturers di-rections.