Polaris Ranger Bluetooth Overhead Audio Sound Bar with 2-Channel Amplifier, 2 Roll Cage Speakers, and Powered Subwoofer Enclosure System by MTX Audio RANGERBOAKIT3

1569.6
Ask a question
$1,569.60
This audio package includes a Bluetooth overhead audio system and amplified subwoofer enclosure that delivers unbeatable, high-quality audio for Polaris Rangers.
Qty:
Add to Wishlist
Verify your product fitment.

SKU: RANGERBOAKIT3
Brand: MTX Audio

Polaris Ranger Bluetooth Overhead Audio Sound Bar with 2-Channel Amplifier, 2 Roll Cage Speakers, and Powered Subwoofer Enclosure System

MUDSYS46 Key Features:

  • Includes Four 6.5" All-Weather Coaxial Speakers
  • Source Unit with Integrated 280-Watt Power Amplifier and Digital Clock
  • Inputs - Bluetooth 2.0, 3.5mm Auxiliary, & USB (External Memory Stick)
  • AM/FM Radio with USA and European Frequency Bands
  • RCA Output
  • Integrated Wiring Harness (Power/Ground/Accessory)
  • Storage Cargo Nets and Overhead LED Dome Light
  • Fits Cages with Inside Measurement 49.25" to 56.0"
  • Mounts to Roll Bars with Diameter Between 1.75" and 2"
  • Weather Resistant in Accordance with IP66 Rating

MUD100.2 Amplifier Key Features:

  • Compact Design Enables Installation Anywhere
  • Conformal Coated Printed Circuit Board that Resists Moisture
  • Fixed Crossovers, High and Low Pass Allow Use with Full Range Speakers or Subwoofers
  • 400W Peak Power

MUD65P Speaker Key Features:

  • Fits Bars Between 1 1/2" and 2"
  • Polypropylene Woofer and Soft Dome Tweeter
  • Internal Crossover Network
  • ABS Impact Resistant Grille with UV Inhibitor
  • Tested 500hrs to ASTM B117, D4329 Standard

RANGER-10 Subwoofer Enclosure Key Features:

  • Integrated 250-Watt RMS Amplifier
  • Low Level Input with External Gain Control
  • High Efficiency 10" Polypropylene Subwoofer
  • Mounts Under Driver's Seat on 2-Door Models and Under Rear Driver's Side Seat on 4-Door Models
  • No Cutting or Drilling Required

Tech Specs:

Description 2-Channel

RMS Power (Watts) 200

4 Ohm RMS Power Output 50W x 2 Channels

2 Ohm RMS Power Output 100W x 2 Channels

1 Ohm RMS Power Output NA

Topology Full Range Class D

THD <1.0%

Frequency Response 20Hz - 20kHz

Low Pass Filter Fixed HPF/LPF @ 80Hz, 12dB/Oct

Max Sensitivity 200mV

Maximum Input Signal 5V

Height 4.65"

Width 5.71"

Depth 1.61"

Warning: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Fitments

Only registered users can write reviews. Please, log in or register

* Required Fields