This Polaris Ranger 900 Winch Mount by EMP is designed to install on the front bumper and is rated for up to a 4,500 lbs. winch. It fits full-size Polaris Ranger models with the Pro-Fit cage.You can mount either a regular winch or a wide spool winch with this superior winch mount by Extreme Metal Products. Many winches from the top brands, like Warn and SuperATV can be installed on your Polaris Ranger 900 using this sturdy winch mount.
Polaris Ranger 900 Winch Mount Features:
Designed foFull-Size Polaris Ranger models with the PRO-FIT cages
Fits most major brand UTV winches up to 4500 lbs.
Mounting holes for both regular winches and wide spool winches.
Bolt Patterns; 6-5/8" wide x 3" deep (wide spool) and 4-7/8" x 3" deep (regular spool).
Two Fair lead Bolt Patterns; 4-7/8" (regular spool) and 6" Centers (wide spool).
Powder Coated Black for superior protection.
Laser Cut and CNC formed to ensure a perfect fit.
Made In the USA
Note: Does not fit RZR XP900
Warning: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Mounting holes for both regular winches and wide spool winches.
Bolt Patterns; 6-5/8” wide x 3”’ deep (wide spool) and 4-7/8” x3” deep (regular spool)
Two Pair lead Bolt Patterns: 4-7/8” (regular spool) and 6” Centers (wide spool).
Includes:
(1) Winch Mtg. Plate
Hardware Bag:
(1) Fairlead Adapter Plate (plate with four studs)
(2) 3/8-16x1” Flange head Bolts
(2) 3/8x1” Carriage Bolts (black)
(4) 3/8” Serrated Flange Nuts
(4) 5/16 Nylon Nuts
(4) 5/16 Flat Washers
Installation:
Set vehicle parking brake.
Remove stock bumper. Save hardware.
Mount your winch upside down to the mounting plate with the hardware that came with your winch. Note: make sure the cable comes over the top of your spool then out the fairlead bracket.
Bolt the winch assembly to your frame. The 3/8 flange bolts will go into the threaded holes in your frame. Do not tighten yet.
Bolt the bumper back on using your stock hardware again.
Bolt the roller fairlead bracket to the bumper. The bolts will go through the bumper and the winch plate. Note: if using a small spool winch you will have to use the adapter bracket and 5/16” hardware provided.