Polaris Ranger Mid-Size & Polaris Ranger EV Hard Top with LED Dome Light by EMP

327.99
Ask a question

Regular Price: $339.99

Special Price $327.99

Availability: Ships in 3-5 Days

Polaris Ranger Hard Top 16-gauge steel Laser cut and CNC formed to ensure a perfect fit ensuring a rigid structure with no rattling
Qty:
Add to Wishlist
Verify your product fitment.

SKU: 10569
Brand: Extreme Metal Products

Extreme Metal Products Overview by gearup2go.com

Polaris Ranger Mid-Size & Polaris Ranger EV Hard Top with LED Dome Light by EMP

The Polaris Ranger Mid Size Hard Top Roof by Extreme Metal Products helps keep the sun and rain off you for a more enjoyable ride. This metal roof is laser cut and CNC formed for a perfect fit. The sides are double folded to add strength, style and a soft edge. Will fit most windshields and features a handy dome light for convenience.

Polaris Ranger Hard Top Roof Features:

  • Manufactured from 16-gauge steel
  • Powder coated  for superior protection
  • Laser cut and CNC formed to ensure a perfect fit ensuring a rigid structure with no rattling
  • Edges are folded over twice creating a 1/8" thick angle around the outside edges
  • Includes a waterproof LED dome light that runs 100 hours on "AAA" batteries (included)
  • Includes installation instructions and all necessary mounting hardware
  • Made in U.S.A
  • Will Not Fit Full Size Rangers
Warning: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

2014 Fitments

  • 2014 Ranger EV
  • 2014 Ranger 400/500/570/800 (Midsize)

2013 Fitments

  • 2013 Ranger EV
  • 2013 Ranger 400/500/800 (Midsize)

2012 Fitments

  • 2012 Ranger EV
  • 2012 Ranger 400/500

2011 Fitments

  • 2011 Ranger EV
  • 2011 Ranger 400/500

2010 Fitments

  • 2010 Ranger EV
  • 2010 Ranger 400/500

Polaris Ranger XP900 Top P/N: 11894

Ranger 400 Hard Top P/N 10569

Fits: 2010 Ranger 400 only.

Includes:

1. (1) Hard Top

2. (1) Light Housing P/N 100393-02

3. (2) 10-32 x 3/4 Truss head screw.

4. (3) 1/4-20 x 3/4” Flange hd bolt.

5. (3) 1/4-20 x 2-1/4” Flange hd bolt.

6. (6) Quick Connect Clamps (9881) less knobs.

7. (3) 3/4” x 1-1/8” Round Spacer.

 8. (2) 1/8” x 1” x 30” Gasket.

9. (3) 1/8” x 1” x 3” Gasket

 10. (1) Waterproof Light w/batteries.

Installation: 

1. Remove the nylon nuts from the clamps and set aside until last.

2. The front will use three clamps and the 1/4-20 x 3/4” flange bolts.  Simply, run the bolt though the top and into the clamps.

3. The rear will use the remaining clamps, spacers and the 1/4-20 x 2-1/4” bolts.  Simply, use the spacer to raise the height of the rear bar to the same level as the front.

4. Use the gasket to protect the top of your cage.  You can put it where ever you like.

5. Once, you have everything tight you can install the nylon nuts on the clamps.  Be very careful not to over tighten them and break the studs.  Do not use an impact gun.

6. Using the light housing and 10-32 screws attach the light to the top.

Only registered users can write reviews. Please, log in or register

* Required Fields