2016+ Polaris General Rear Window by EMP

2016+ Polaris General Rear Window

Adding a rear window to your Polaris General reduces dust swirl and provides rear protection from rain, snow or debris. When this rear dust stopper is combined with a front windshield, you'll experience a noticeable improvement in the comfort of your next ride! Unlike other rear cab-backs on the market that are made of Acrylic, this Polaris General Rear Window is constructed from durable Polycarbonate materials and is designed to last. Installation is simple, requiring no tools or drilling, and is done in minutes!

2016+ Polaris General Rear Window Features:

• Hard Coated on both sides.
• No tools necessary for removal and installation.
• Polycarbonate not Acrylic like others on the market.
• Contoured for a near custom-fit look
• Made in the USA

Consider pairing with a 2016+ Polaris General Front Windshield!! 

Polaris General Cab Back
PIN: 13086
Installation Instructions

Includes:
Polaris General Cab Back
PIN: 13086
Installation Instructions
1. (1) Hard Coat Cab Back (13086)
2. (6) Clamps (11898-02)
3. (6) 1/4" x 1-1/4" Black Fender Washers
4. (6) 1/4-20 Thumbscrews
5. (3) 6" Long Hook and Loop (Velcro)
6. (1) 1/4" x 2"Adhesive backed foam strip
7. ( 1) Logo Sticker

NOTE: Once the protective film is removed
this item can not be returned.

Installation:
1. Peal back the protective film around the
six slots.
2. Apply (1) Hook and Loop to the rectangle
tube on the back of the cage. This
will keep the center of the cab back from
vibrating.
3. Apply the other (2) hook and loop along
the bottom flange. Put one on each side
or where you feel it is needed.
4. Attach the cab back to the cage using the
clamps, washers, and thumbscrews.
You can use the foam strip in the center on
the top if you feel it is needed.