SKU: 12863
Brand: Extreme Metal Products
Polaris ACE / RZR Speaker Pods Set by EMP
When you love music as much as your UTV, nothing can equal that rush you get when you step on the gas as the perfect song comes on. The band is getting down, your adrenaline is running up, and for a moment it feels like you can fly. That moment is what Polaris ACE/RZR Speaker Pods are built for.
Extreme Metal Products designed these pods so you can install your own audio like a pro. With features like solid ABS Plastic and an easy mounting system, setup is a cinch. The door speaker pods are compatible with most 6.5 inch speakers and blend seamlessly with the design of your rig by using factory-style rivets. To mount, simply attach the provided hardware to existing holes at the top of your stock door, and use the template to drill holes on the bottom.
Polaris ACE / RZR Speaker Pods Set Features:
- Sold as a Pair (Drivers and Passengers sides)
- Made from ABS Plastic
- Mounts to stock door
- Accepts most 6-1/2 inch Speakers
- Requires drilling using pod as a template
- Attaches with Factory Style Plastic Rivets
- Made In Cleveland,Ohio
Note: the 50” wide RZR Trail models have different doors and these will not fit.
2016 Fitments
- 2016 RZR XP 1000
- 2016 RZR 1000 S
- 2016 RZR 900
2015 Fitments
- 2015 RZR 900
2014 Fitments
- 2014 RZR XP 1000
RZR Door Speaker Pods (6-1/2" speakers)
PIN: 12863
Fits:
2014-16 XPlK, 2015 RZR 1000-S
2015-16 RZR 900 (55" x 60" wide models only)
Will not fit the RZR Trail (50" wide)
Includes:
RZR Door Speaker Pods (6-1/2" speakers)
PIN: 12863
Fits:
2014-16 XPlK, 2015 RZR 1000-S
2015-16 RZR 900 (55" x 60" wide models only)
Will not fit the RZR Trail (50" wide)
1. (2) Speaker Pods (drivers and passenger sides)
2. (6) 1/4" x 1" Self Tapping Screw (TEK-Black)
3. (12) (5/16") Plastic Rivets
4. (1) Logo Sticker
Installation:
1. Peel off the double sided tape backing.
2. Stick it to the door and attach the top to the
stock holes with two plastic rivet.
3. Using the self tapping screws and a cordless
drill with a 3/8' nut driver. Run the screws
through the pre-drilled holes in the pods going
through the plastic and into the metal door
frame. OR go straight to step 4.
4. Using a 5/16" diameter drill bit. Drill through
the pre-drilled holes and the metal door frame.
Then insert the remaining plastic rivets into the
holes.
5. Install your speakers into your 6-1/2" speaker
of choice pods.
You have a choice of using the self tapping screws
or additional plastic rivets to secure the bottom of
the pods.
