Brand: Extreme Metal Products
2005-2013 Kubota RTV 900XT Full Windshield by EMP
The windshield is easy to install using the (5) included Quick Connect Clamps and can easily be removed by simply removing the (5) thumbscrews. The clamps will remain so you can easily install it again. The windshield is CNC routered from MR-10 Hard Coat Polycarbonate (LEXAN) with an 11 gauge Powder Coated Metal Stiffener along the bottom that adds rigidity. The gasket along the bottom protects your hood from scratches. DOT rated and stamped in the lower passenger corner.
Kubota Full Windshield Features:
- CNC Routered from MR-10 Hard Coat Polycarbonate (LEXAN).
- Attaches with (5) Quick Connect Clamps.
- 11 ga. Powder Coated Metal Stiffener along the bottom adds rigidity.
- Gasket along the bottom protects your hood.
- DOT Rated and stamped in the lower passenger corner.
This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Kubota RTV900XT Full Windshield by EMP 11238 Review by Jim
Good product, good service..
just one note, when installed on RTV with factory plastic roof, it needs spacers behind top two clamps to avoid hitting the u-bolts that hold the roof down. Made my own..... (Posted on 10/8/2012)