Kawasaki Teryx and Teryx4 Front Bumper/Brush Guard with Winch Mount by EMP

Teryx4 Front Bumper with Winch Mount

Kawasaki Teryx and Teryx4 Front Bumper/Brush Guard with Winch Mount by EMP

Add style and function to your Teryx4 with this brush guard.Mount you winch on top to keep it high out of the mud and water or mount it in the stock location behind the bash plate.Designed in CAD,laser cut and CNC formed to ensure a perfect fit.

Kawasaki Teryx and Teryx4 Front Bumper/Brush Guard with Winch Mount Features:

• Replaces stock front brush guard.
• Accepts most winches up to 4000 lbs.
• Allows hood to open completely with a Warn 4000 lb winch.
• All welds ground smooth.
• Texture powder coat for superior protection.
• Laser cut and CNC formed to ensure a perfect fit.
• 1-1/2" diameter stinger tube.
• Bumper made from 1/8” thick American Steel.
• Mounting brackets and bash plate made from 3/16” thick American Steel.
• Two Winch Bolt Patterns (3" deep x 4.875" wide and 4" deep x 6" wide, for regular and wide spool winches).
• Fairlead knock out in the bash plate allows you to mount your winch in the stock location as an option.
• Made in Cleveland,Ohio.

Teryx Front Bumper Installation

P/N: EMP-12316 

Accepts up to a 4000 lb Warn Winch. Larger winches may not allow the hood to open all the way and/or void your 30 day warranty. Includes: I. (I) Front Bumper 11899 2. (2) Mounting Bracket 123 16-03 (Left and Right) 3. (I) Bash Plate 12316-04 Hardware Kit: I. ( 14) 3/8-16 x I" Black Carriage Bolt (Black) 2. (14) 3/8-16 Nylon Nut-Zinc 3. (14) 3/8 Flat Washer-Zinc 4. (2) #14 Black SelfTapping Screws 5. (I) Logo Sticker

Installation should only by done by a professional technician. Installation: I. Set Parking Brake. 2. Remove stock front bumper and save the bolts as you will be using them to mount the new bumper. 3. Bolt the side brackets to the frame next to the radiator using the stock bolts. Snug Bolts down. 4. Mount the Bash Plate to the front frame using stock two bolts or self threading screws provided. You will be bolting through the two slots on the underside of the bash plate. 5. Bolt the bumper to the brackets and bash plate using the 3/8" Carriage Bolts, Washers and nuts (see fig. 3). 6. Drill two 3/8" diameter holes in the frame using the two square holes in the lower bash plate as a template. Wear safety glasses when drilling to avoid injury. 7. Bolt the bash plate to the frame using the remaining 3/8 hardware in the holes you just drilled. 8. Mount your winch on top of the bumper or to the frame under the bumper by following the instructions that came with our winch. If you mount it below you will need to cut the rectangle in the bash plate with a hacksaw. Simply, cut the four tabs holding it into the bash plate. 

Installation Tip:

If mounting a winch on top make sure the winch and bumper is all the way forward. If it is not the hood will not open completely. In other words, loosen the bolts an pull the bumper forward and then tighten them again.

See our website for installation video or see it here.

http://www.youtube.com/watch?v=knjlyoKSbFE