Kawasaki Teryx 800 2014-15 Scratch Resistant Flip Windshield by SuperATV

449.95
Ask a question
$449.95

Availability: In Stock

1/4” AR abrasion resistant polycarbonate makes this Flip Up Front WIndshield the bomb for your Teryx!!
Qty:
Add to Wishlist
Verify your product fitment.

SKU: FWS-K-TRX4-70
Brand: SuperATV

Kawasaki Teryx 800 Scratch Resistant Flip Windshield by SuperATV

Help protect you and your passenger from sticks and other flying debris while blazing the trail with a SuperATV windshield - the best off-road windshield on the market.With many protection and tint options to choose from,each windshield is a super tough polycarbonate construction with a bottom seal that’s contoured to your ride’s design.Our tinted and non-tinted,scratch resistant,1/4” thick AR is much stronger than your average UTV windshield. We’ve also beefed up the scratch resistance by hard coating this style windshield on both sides for years of use.

Kawasaki Teryx 800 Scratch Resistant Flip Windshield Features:

  • 1/4” AR abrasion resistant polycarbonate
  • Windshields are hard coated on both sides for extreme durability
  • Protects against chemical and UV attack
  • Contoured to hood with full length rubber seal for a great fit
  • Easy to install – comes with all necessary hardware and instructions
  • Can be used with soft or hard tops
  • Add an LED Light Kit to brighten your night riding!
Warning: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

2015 Fitments

  • 2015 Teryx
  • 2015 Teryx 4

2014 Fitments

  • 2014 Teryx
  • 2014 Teryx 4

2013 Fitments

  • 2013 Teryx 4

Kawasaki Teryx Scratch Resistant Flip Windshield_ FWS-K-TRX4-70_1

 

 

 

Kawasaki Teryx Scratch Resistant Flip Windshield_ FWS-K-TRX4-70_2

- When assembling, do not tighten hardware completely.

- SuperATV has found that installing components to windshields on a workbench, as
shown in illustrations, makes for easiest installation.

 

Kawasaki Teryx Scratch Resistant Flip Windshield_ FWS-K-TRX4-70_3

To ease installation, soak Seal in hot water before cutting or installing to increase flexibility.

 

 

- Install (2) Clamps (F) to Lower Windshield (B) with M6-1.0 x 20mm Lg. BHCS and M6 Washers.
- Install Right/Left Supports (G)(H) to Lower Windshield (B) with M6-1.0 x 20mm Lg. BHCS, M6
Washers, and M6-1.0 Nylock Nuts.
- Secure Right/Left Supports (G)(H) to Clamps (F) with M8-1.25 x 15mm Lg. BHCS.

Kawasaki Teryx Scratch Resistant Flip Windshield_ FWS-K-TRX4-70_4

 

 

- Install Catch, part of Latch Assembly (D), to Lower Windshield (B); place Latch Support (J) on bottom
section of Lower Windshield (B) and secure with M6-1.0 x 20mm Lg. BHCS and M6-1.0 Nylock Nuts.

Kawasaki Teryx Scratch Resistant Flip Windshield_ FWS-K-TRX4-70_5

 

- Install Lower Windshield (B) to Roll Cage with bolts included with Clamps (F).
- Install provided Gasket to Lower Windshield (B).

Kawasaki Teryx Scratch Resistant Flip Windshield_ FWS-K-TRX4-70_6

 

 

------------------------------------------Upper Windshield (A) --------------------------------------

-Install Handle and Support, part of Latch Assembly (D), to Upper Windshield (A) with M6-1.0 x 20mm Lg. BHCS and    M6-1.0 Nylock Nuts.

 

Kawasaki Teryx Scratch Resistant Flip Windshield_ FWS-K-TRX4-70_7

 

- Install Pivot Block (E) to Upper Windshield (A) with M6-1.0 x 20mm Lg. BHCS, M6 Washers,
  and M6-1.0 Jam Nuts.
- Install Clamp (F) and Support (K) to Pivot Block (E) with M8 Shoulder Bolt.
- Repeat for opposite side.

Kawasaki Teryx Scratch Resistant Flip Windshield_ FWS-K-TRX4-70_8

 

 

- Install Clamp (F) and Gas Strut (C) to Support (K).
- Secure Gas Strut (C) to Pivot Block (E) with M8 Nylock Nut.
- Repeat for opposite side.

 

 

 

 

 

Kawasaki Teryx Scratch Resistant Flip Windshield_ FWS-K-TRX4-70_9

 

- Install Upper Windshield (A) to Roll Cage with bolts included with Clamps (F).

 

 

Kawasaki Teryx Scratch Resistant Flip Windshield_ FWS-K-TRX4-70_10

 

 

 

- Engage Latch and align Windshield assembly to machine making sure that Seal,
  on Lower Windshield (B), is in contact with Hood.
- Tighten hardware completely.Kawasaki Teryx Scratch Resistant Flip Windshield_ FWS-K-TRX4-70_11

Only registered users can write reviews. Please, log in or register

* Required Fields