Brand: Plotmaster Systems
Corn, Soybeans, Grain Sorghum, Sunflowers, Peas, Cereal Grains, etc.
4 ROW DESPENSING BAR;
1 x 1 SQUARE TUBE WITH ROUND DISPENSING
TUBES AFFIXED TO BAR WITH EACH TUBE
STATIONED UNDER DESIGNATED DROP HOLES
BENEATH THE SEEDER ASSEMBLY.
Since the Grain Drill requires the Plow Attachment (standard with your Plotmaster) in order to plant in rows you will need to exchange positions with your Rear “V” Gang and the Center Plow.
Both attachments are easily disconnected from your Plotmaster by removing the clips and pins and then utilizing your 3-point to raise the Plotmaster and then pull forward.
Both attachments can be removed simultaneously or individually but it is recommended that both be done at the same time.
Once you have removed the Plow Attachment you can then secure the (3) additional tines that come in your Grain Drill Kit to the Plow Bar before reinserting it into the rear receiver’s.
It is suggested that if you want to use the Rear “V” Gang in the center, as shown, insert the Gang into the center receiver’s before inserting the Plow into the rear receiver’s.
Once this exchange is made then you can complete the grain Drill Assembly process
(Right and Left Dispensing Bar Included) (Dispensing Bar’s Mount between Seeder Assembly and Splatter Plate)