Polaris Sportsman Ace Full Windshield by EMP

Full Windshield for the Polaris Sportsman Ace by EMP

Polaris Sportsman Ace Full Hard Coated WindshieldEMP is a leader in the UTV industry,providing high quality and durable products.These windsheilds are no exception.With an easy attaching system and many other features,this windshield is designed to last.

Made from .188" thick hard coated MR-10,this is probably the last windshield you will ever buy for your Ace.It features our "Fast Straps" so you can easily remove the windshield in seconds without any tools.Simply unhook the rubber straps.Rubber straps will not scratch your cage.

Full Windshield for the Polaris Sportsman Ace Features:

• .188" thick Hard Coated Polycarbonate (Both Sides).
• Attaches with our patent pending rubber "Fast Straps".
• Rubber mounting straps will not rust or rattle.
• Weather strip along the bottom will protect your hood.
• MR-10 hard coat on both sides, unlike many others.
• MR-10 Lexan will not break like acrylic.

Lexan Margard Cut Sheet

(from manufacturer's website)

This Lexan Margard sheet has maximum toughness,with mar resistance approaching that of glass and significantly improved resistance to weathering.MR-10 sheet provides extended service life.It has excellent clarity and durability.it is lightweight and is superior glazing material for institutions,office buildings,stores and more.It will withstand -40deg F to 270 deg F.and has a silicone hard-coat surface.It is non-formable and UV resistant.LEXAN MR10 sheet is mar-and graffiti-resistant.It combines the impact strength of LEXAN polycarbonate sheet with a proprietary abrasion and UV-resistant MARGARD II surface.

Polaris ACE Hard Coated Windshield

PIN: 12482

Fits: 2014-15 ACE 

Includes:

l. (1) 12482-01 Windshield

Hardware Kit:

1. (4) 11651 Rubber Fast Straps

2. (1) 3/16" x 29" Long Edge Trim

3. ( 1) Logo Sticker

Instructions:

1. Peal back the protective coating along both sides of the bottom edge. Only about an inch up.

2. Slide the Rubber Edge trim over the bottom edge. Make sure you have it centered.

3. Bolt the Rubber Straps to the slots. Do not tighten yet.

4. Mount the assembly to the cage by wrapping the rubber straps around the tubing and hooking them on to the plastic pins.

5. Once, you have the straps in the correct location tighten the hardware.