Chain Saw Boot by Kolpin

56.69
Ask a question

Regular Price: $62.99

Special Price $56.69

Availability: In Stock

The chain saw boot utility grip ATV accessory by Kolpin is designed to conveniently secure and protect your chain saw when traveling over rough terrain.
Qty:
Add to Wishlist
Verify your product fitment.

SKU: 20600
Brand: Kolpin Powersports

Kolpin Saw Boot

Chain Saw Boot by Kolpin

The Chain Saw Boot by Kolpin was designed to conveniently secure and protect your chain saw when travelling over rough terrain. It features heat shielding, allowing you to carry a hot saw.

Chain Saw Boot Features:

  • Secures and protects your chain saw when travelling over rough terrain
  • Saw can be quickly secured/removed with a bungee tie down
  • Accommodates saw bars up to 20.0"
  • Universal fit for most ATV racks
  • Standard Kolpin Gun Boot brackets simply remove your Gun Boot case and install your Saw Boot
  • Designed to be used with the Gun Boot IV Loop Bracket
  • Secure and protect your chain saw when traversing over rough terrain
  • Saw can be quickly secured/removed with included bungee tie down
Warning: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

2017 Fitments

  • 2017 Rubicon 500
  • 2017 Rincon 680
  • 2017 Rancher TRX 420
  • 2017 Outlander 650/850/1000
  • 2017 Kodiak 700
  • 2017 KingQuad 400/500
  • 2017 Grizzly 700
  • 2017 Foreman 500
  • 2017 Brute Force 750

2016 Fitments

  • 2016 Utility ATV 300/500/1000
  • 2016 Rubicon 500
  • 2016 Rincon 680
  • 2016 Rancher TRX 420
  • 2016 Outlander 570/650/850/1000
  • 2016 Kodiak 700
  • 2016 KingQuad 750
  • 2016 KingQuad 400/500
  • 2016 Grizzly 700
  • 2016 Foreman 500
  • 2016 Brute Force 750

2015 Fitments

  • 2015 Utility ATV 400/450/500/700/1000
  • 2015 Sportsman XP 550/850
  • 2015 Sportsman 570
  • 2015 Rubicon 500
  • 2015 Rincon 680
  • 2015 Rancher TRX 420
  • 2015 Outlander 500/650/800/1000
  • 2015 KingQuad 750
  • 2015 KingQuad 400/500
  • 2015 Grizzly 550/700
  • 2015 Foreman 500
  • 2015 Brute Force 750

2014 Fitments

  • 2014 Utility ATV 400/450/500/550/700/1000
  • 2014 Sportsman XP 550/850
  • 2014 Sportsman 570
  • 2014 Sportsman 450/550
  • 2014 Sportsman 400/500/600/700/800
  • 2014 Rubicon 500
  • 2014 Rincon 680
  • 2014 Rancher 420
  • 2014 Outlander 500/650/800/1000
  • 2014 Outlander 400
  • 2014 KingQuad 750
  • 2014 KingQuad 400/500
  • 2014 Grizzly 550/700
  • 2014 Foreman 500
  • 2014 Brute Force 750
  • 2014 Brute Force 650

2013 Fitments

  • 2013 FourTrax Rincon Base
  • 2013 Foreman 500
  • 2013 Brute Force 750
  • 2013 Brute Force 650

2012 Fitments

  • 2012 Utility ATV 425/450/550/700/1000

2011 Fitments

  • 2011 Utility ATV 425/450/550/650/700/1000

Chain Saw Boot_20600_1

Saw Boot Assembly Instructions:
1. Find the exhaust outlet on your Saw, place Saw in Saw Boot.
2. Mark where your exhaust is located inside of the Saw Boot.
3. Locate where the 6” x 6” piece of heat shield material will be placed in the bottom of the saw boot.
4. Next, peel the dull paper backing (not the foil) from the heat shield and adhere to the saw boot in the location marked.
5. The Bungee included is to keep the saw in the saw boot during transportation. Extra holes may be drilled for a more customized fitment or use of extra bungees.

Brackets Installation – (not included)
1. The saw boot is designed to work with the Kolpin Gun Boot Brackets (P/N- 20035, 20032). Simply slide the Saw Boot into the Bracket and secure with the pins provided with those brackets. The U-Bracket is needed if securing the Saw Boot to your 20032 Bracket (newer models only). Simply remove the smaller U-bracket and reattach the Saw Boot U-Bracket to the plate.

 

Only registered users can write reviews. Please, log in or register

* Required Fields