Arctic Cat WildCat 1000 Half Fixed Windshield GP by Kolpin

141.3
Ask a question

Regular Price: $157.00

Special Price $141.30

Availability: In Stock

Easy Installation..No drilling required & Extremely durable rubber cushioned loop clamps.
Qty:
Add to Wishlist
Verify your product fitment.

SKU: 2713
Brand: Kolpin Powersports

Arctic Cat Wild Cat Half Fixed Windshield Features:

  • .177" General Purpose Polycarbonate
  • Easy Installation.. No drilling required
  • Extremely durable rubber cushioned loop clamps
  • All hardware (nuts & bolts) are stainless steel with black-coated finish... No Rust!!
  • Comes complete with all mounting hardware & detailed instructions
  • Trailerable
Warning: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

2017 Fitments

  • 2017 Wildcat 700
  • 2017 Wildcat 4 1000

2016 Fitments

  • 2016 Wildcat 1000
  • 2016 Wildcat 4 1000

2015 Fitments

  • 2015 Wildcat 1000
  • 2015 Wildcat 4 1000

2014 Fitments

  • 2014 Wildcat 1000
  • 2014 Wildcat 4 1000

2013 Fitments

  • 2013 Wildcat 1000
  • 2013 Wildcat 4 1000

2012 Fitments

  • 2012 Wildcat 1000

2713-1

IMPORTANT NOTICES
READ AND UNDERSTAND THESE INSTRUCTIONS COMPLETELY BEFORE INSTALLATION TO AVOID INJURY TO YOURSELF,
DAMAGE TO THE VEHICLE OR ACCESSORY.

FOR PROPER INSTALLATION, TWO PEOPLE ARE REQUIRED.
TORQUE SPECIFICATIONS MUST BE FOLLOWED WHEN TIGHTENING BOLTS.
AS SPECIFIED ON CARTON LABEL, ONCE PROTECTIVE FILM ON SHIELDS IS REMOVED, PRODUCT CANNOT BE RETURNED.
AS SPECIFIED ON CARTON LABEL, DAMAGE CAUSED BY PACKAGING STAPLES IS NOT COVERED BY WARRANTY. ALL STAPLES MUST BE REMOVED PRIOR TO
REMOVING PRODUCT FROM CARTON.
FAILURE TO FOLLOW THESE INSTALLATION INSTRUCTIONS COMPLETELY MAY VOID ANY WARRANTABLE COMPONENTS AND RESULT IN PRODUCT DAMAGE
OR PERSONAL INJURY.
DO NOT USE LOCKTITE OR ANY OTHER SIMILAR FASTENER ADHESIVE. THESE TYPES OF PRODUCTS REACT TO PLASTICS AND CAUSE CRACKING. NOT
COVERED BY WARRANTY.
OUR WINDSHIELDS ARE MADE FROM THE HIGHEST QUALITY MATERIAL PROVIDING OPTIMUM TRANSPARENCY AND CLARITY. BLURRINESS AND/OR
EXTRUSION MARKS MAY OR MAY NOT APPEAR WHEN LOOKING THROUGH WINDSHIELD FROM A WIDE, SIDE-ANGLE. THIS IS NORMAL FOR ALL EXTRUDED
CLEAR PLASTIC MATERIALS.
THE APPLICATION OF IMPROPER CLEANERS, ABRASIVE AND/OR DIRTY CLEANING TOWELS CAN SEVERELY DAMAGE THE PRODUCT. FAILURE TO FOLLOW
CLEANING RECOMMENDATIONS (PROVIDED HEREWITH) MAY VOID ANY WARRANTABLE COMPONENTS.
DEALER

These instructions contain important information for future reference and must be given to the customer at time of purchase or upon completion
of installation.

2713-2

1. Installation

a) To apply the co-extruded bulb seal (Item B) to the windshield (Item A), find a clean flat area where you can lay down the windshield. Partially remove the protective film on both sides and apply the co-extruded bulb seal using manual pressure to ensure good adhesion. (the seal has an internal steel wire structure, a wire cutter is required)

2713-3

b) Install the windshield to the vehicle using supplied hardware (Item C). Adjust the position of the windshield and tighten.

Caution: over tightening any hardware could cause irreversible damage to the windshield.

2713-4 

2. Maintenance and Car

Tighten all hardware after first use and periodically thereafter.

CLEANING:

  • Rinse with lukewarm water; wash gently with mild soap or detergent and lukewarm water, using a soft cloth or sponge. DO NOT SCRUB or use brushes or squeegees.
  • Rinse again. Dry with soft cloth or moist cellulose sponge to prevent water spotting.
  • To remove wet paint, glazing compound or grease, rub lightly with a good grade of VM&P naphtha or isopropyl alcohol, then wash and rinse. DO NOT USE GASOLINE.

NOTICE: Abusive cleaning procedures by hand washing or automated washing equipment will eventually result in visual hazing, loss of light transmission and coating delamination.

Compatible Cleaning Agents

  • Aqueous Solution of Soaps and Detergents

Joy Freon T.F. Palmolive liquid Top Job VM&P grade Naphtha Windex (with ammonia D)

MINIMIZING HAIRLINE SCRATCHES

For minimizing scratches and minor abrasions, mild automobile polish can be used.

Recommended products: Johnson Paste Wax, Novus Plastic Polish #1and #2, Mirror Glaze plastic polish and Plexux1.

Testing polish on a separate Lexan sample is recommended. Be sure to follow product instructions carefully.

Only registered users can write reviews. Please, log in or register

* Required Fields